TraduQ CAT

A real CAT tool. Free, online, nothing to install.

TraduQ CAT is a free CAT tool that runs in your browser and opens Trados and memoQ packages, XLIFF, Office, InDesign and software files, with TM matches, a termbase and QA, and it uploads nothing.

See what it does

Free, no account. Your files never leave your computer.

Your files are read in your browser and never uploaded. Your work is saved only in this browser.

Opens

  • Trados .sdlppx
  • memoQ .mqout
  • SDLXLIFF
  • XLIFF
  • Word
  • Excel
  • PowerPoint
  • InDesign
  • PDF
  • Subtitles
  • Software strings
  • HTML

All formats

What it does

Built for the files clients and agencies actually send.

InDesign with a reference PDF

Open IDML, InCopy, snippets or the zip from File › Package. The segment you are on lights up in the reference PDF.

As you move down the brochure in the grid, the segment you are on lights up in the reference PDF, page by page.

Open an IDML file, an InCopy story (.icml), an InDesign snippet (.idms) or the zip from InDesign's File › Package. Add the PDF of the layout under Resources › References, and the segment you are on is highlighted where it appears in the PDF.

  • The export gives back the same file with only the translated text changed, in the target language, so InDesign hyphenates and spell-checks it in that language.
  • A generated table of contents is rebuilt in the target language when you use Layout › Update Table of Contents in InDesign, and a paragraph in another language opens locked, labelled with its language.
  • The "May not fit" check warns about stories whose translation may overflow their frames.

Read the docs

Live preview of Word, HTML, Markdown and app strings

See the document with your translation, following your edits, and click in the preview to jump to that segment.

As you type the Spanish for an HTML page, the preview follows your edits and highlights the segment you are on.

Open the Preview tab (Ctrl+Alt+V) and see the document with your translation, following your edits. The segment you are on is highlighted, and a click in the preview takes you to it. Everything is built in your browser.

  • Word files, and Trados and memoQ packages that carry the Word original.
  • Markdown and HTML files rendered, with nothing loaded from the internet.
  • Software strings (JSON, PO, YAML, .strings, RESX and more) as the app would show them, with every plural form, the key and the length.

Read the docs

Subtitles over your video

Pick the video from your computer and watch your translation over it as you type. The video never leaves your browser.

As you type a subtitle while its cue plays, the line shows over the video with its characters per second.

Open an .srt or .vtt file, pick the video from your computer in the Preview tab and see your translation over it as you type. The video never leaves your browser.

  • Each cue shows its characters per second and line lengths.
  • Checked against 17 characters per second, 42 per line and 2 lines.
  • Play this cue (Ctrl+Alt+C) plays just the current line and stops at its end.

Read the docs

Trados and memoQ packages and return files

Open a Trados .sdlppx or a memoQ .mqout as it is. A TM inside a Trados package is used right away.

Open a Trados project package (.sdlppx) or a memoQ package (.mqout) as it is. A translation memory inside a Trados package is used right away, and when the package carries the Word original, you can also download the translated .docx.

  • A Trados package goes back as a return package (.sdlrpx), tested in real round trips with Trados. Check with the agency the first time.
  • A memoQ package goes back as the translated MQXLIFF files, which your PM imports into the memoQ project.
  • Opened a package in the package inspector? Translate in TraduQ CAT opens it here directly, without choosing the file again.

Read the docs

QA and spell check

Repetitions fill as you confirm, QA re-checks as you fix, and spell check has 42 spell-check dictionaries.

Confirming a segment fills its repetitions, and QA re-checks a segment as you fix it. Spell check has 42 spell-check dictionaries built in (Hunspell), checked in your browser.

  • Same source, different target: see each version side by side and use one everywhere in one step, with Undo.
  • Terms from your glossary that you didn't use in your translation are flagged.
  • Words that stay the same in the target language, like "Hospital" in Spanish, are not called untranslated.

Read the docs

TMs, termbases and Pretranslate

Add your TMX or SDLTM files and a glossary, see matches and terms next to each segment, and Pretranslate fills empty segments.

Add your own TMX or SDLTM files, and a glossary or termbase as CSV, TXT, Excel, TBX or MultiTerm XML. Matches and terms appear next to each segment, and Pretranslate fills empty segments.

  • Everything you confirm is added to a working memory that you can export as TMX.
  • Press and release Ctrl in a target for terms, numbers, codes and TM fragments from the source, with numbers in the target language's format.
  • Matches that differ only in numbers, dates or codes are updated from the source.

Read the docs

Formats TraduQ CAT opens

27 formats in 7 groups, from SDLXLIFF to subtitles and app strings.

Open the file you were sent and send back the same kind.

Office

  • Word .docx
  • Excel .xlsx
  • PowerPoint .pptx

InDesign

  • InDesign .idml
  • InCopy .icml
  • InDesign snippets .idms
  • InDesign package .zip (File › Package)

CAT and bilingual files

  • SDLXLIFF
  • memoQ MQXLIFF / MQXLZ
  • XLIFF 1.2 / 2.0
  • Wordfast TXML (Beta)
  • Wordfast Pro .txlf
  • Trados .sdlppx
  • memoQ .mqout (returned as translated MQXLIFF files, not as a .mqback)

Software strings

  • gettext .po / .pot
  • JSON / ARB
  • YAML .yaml / .yml
  • Java .properties
  • .NET .resx
  • Apple .strings / .stringsdict / .xcstrings
  • Qt Linguist .ts

Subtitles

  • SubRip .srt
  • WebVTT .vtt

Web pages and text

  • Plain text .txt
  • Markdown .md
  • HTML pages .html / .htm

PDF

  • PDF (text only)

SDLXLIFF export is in Beta too, so check the first one you deliver with whoever sent the file.

Your files stay on your computer

Files are read in your browser and never uploaded. Your TMs, glossaries and projects stay in this browser.

The file is opened and edited in your browser and its contents never leave your computer. The only thing we count is that the tool was used, with the file extension and a size range, never the file, its name or your translations.

  • Files are read in your browser and never uploaded, not even a subtitle video.
  • Your TMs, glossaries and saved projects are kept in this browser, on this device, saved as you type.
  • There is no machine translation. The editor never sends your text to a translation engine.

Where is my work kept?

How it compares

Free, in the browser, and it returns Trados packages. Compared with Trados, memoQ and Matecat.

TraduQ CAT next to Trados Freelance, memoQ translator pro and Matecat.

How it comparesPriceWhere it runsTrados packages (.sdlppx)Your files
TraduQ CATFreeIn the browser, nothing to installOpens them and exports a return package (.sdlrpx)Stay on your computer
Trados Freelance$564 a year on the yearly planWindows desktop editor, plus a browser editorOpens them (its own format)On your computer with the desktop editor
memoQ translator pro$436 a yearWindows desktopOpens them and can return them in Trados formatOn your computer
MatecatFree and open sourceIn the browserNot directly. You unzip the package and upload the files insideUploaded to Matecat's servers

Prices from the vendors' own pages, checked on 13 November 2026 (Trados, memoQ) and 14 November 2026 (Matecat), excluding VAT. Matecat has machine translation built in and Trados connects to DeepL through the RWS AppStore. TraduQ CAT has none.

The full comparison of Trados, memoQ, Smartcat and Wordfast

How it works

Open your file

Word, Excel, InDesign, a Trados or memoQ package, and more.

Choose a Word (.docx), Excel (.xlsx) or PowerPoint (.pptx) file, an InDesign or InCopy file (.idml, .icml, .idms), a PDF (text only), an SDLXLIFF, MQXLIFF, MQXLZ, XLIFF or XLF file, a Wordfast .txml or .txlf file, a Trados package (.sdlppx), a memoQ package (.mqout), or a text or software file (.txt, .md, .html, .htm, .srt, .vtt, .po, .pot, .json, .arb, .yaml, .yml, .properties, .resx, .strings, .stringsdict, .xcstrings, Qt .ts), up to 200 MB. Nothing to install, no Trados or memoQ.

Translate with your resources

Your TMs and termbases, matches, Pretranslate and QA.

With a file open, the editor takes the whole window: the grid and a side panel with tabs: TM matches and terms, and the Outline of a document or package. It uses the package's TM and your own TMX, SDLTM or glossary. Matches that differ only in numbers, dates or codes are updated from the source, and Pretranslate fills empty segments. In Word, Excel and PowerPoint, bold, italic and underline show as formatting (Ctrl+B/I/U, or Cmd on a Mac). QA and concordance search are built in.

Download the translated file

In its own format. A PDF comes back as Word.

Download your file with the translations, in its own format: only the targets, their statuses and, in some formats, the file's language marker change; everything else stays as it was. A PDF comes back as a Word document (.docx). You can also export the TM with what you confirmed as TMX. From a Trados package you can also export a return package (.sdlrpx) with your translated files; it has been tested in real Trados round trips, but check with the agency the first time.

Questions before you try it

The ones people ask first. The full list is one click away.

Is TraduQ CAT free?

Yes. It's free and you don't need an account. A file can be up to 200 MB, and a project up to 300 files and 200 MB in all. It runs in your browser, so there is nothing to install.

Which files does TraduQ CAT open?

It opens Trados and memoQ files and packages (SDLXLIFF, MQXLIFF, .sdlppx, .mqout), XLIFF, Word (.docx), Excel (.xlsx), PowerPoint (.pptx), InDesign (.idml, .icml, .idms), PDF as text only, subtitles, software strings and HTML, up to 200 MB. Each file goes back in its own format, a PDF as a Word document. Wordfast TXML files are in Beta.

Read the docs: File formats TraduQ CAT opens

Can I open a Trados or memoQ package without Trados or memoQ?

Yes. Trados packages and files (.sdlppx, .sdlxliff) and memoQ packages and files (.mqout, .mqxliff, .mqxlz) open as they are, with no need to unzip them. A Trados package goes back as a return package (.sdlrpx), and a memoQ package as the translated .mqxlz files in a zip. Check with the agency the first time.

Read the docs: Trados and memoQ packages in TraduQ CAT

Is my file uploaded?

No. The file is opened and edited in your browser and its contents never leave your computer. The only thing we count is that the tool was used, with the file extension and a size range, never the file, its name or your translations.

Where is my work kept?

  • In this browser, on this device, saved as you type: nothing is uploaded or synced unless you set up cloud backup, which encrypts it in your browser first, so another browser or computer won't see it.
  • The space comes from your browser and your disk, not from TraduQ; if the browser had no room to keep your file, resuming may ask you to open the same file again.
  • TraduQ keeps a saved project for 90 days after you last open it, and translations removed from a TM for up to 30 days, unless you empty that list; backups leave them out.
  • Private windows and clearing your site data erase it, and Safari may delete it after about 7 days without a visit.
  • To keep a job or move it to another computer, download the file or use Save progress in the Export menu, and download your TMs and glossaries with Download all in Storage.
  • Persistent storage helps: when the browser grants it (use Make storage persistent above your saved projects), it won't clear your work to free up space.

Does it use machine translation or AI?

No. TraduQ CAT has no machine translation and no AI. The suggestions come from your own translation memories and termbases, and your files never leave your computer.

Read the docs: Translation memories in TraduQ CAT

Is it a full CAT tool? Does it replace Trados or memoQ?

Not entirely. It is a browser CAT tool for bilingual files and packages, Office documents, PDFs and software strings, and you translate without installing anything. For a Trados or memoQ package, the final document is generated by whoever sent it to you, from the file you give back. It translates Word (.docx), Excel (.xlsx) and PowerPoint (.pptx) files directly and returns them translated in the same format, a PDF as text that comes back as a Word document, a Wordfast .txml or .txlf in its own format, and text and software files (.txt, .md, .html, .srt, .vtt, .po, .json, .arb, .yaml, .yml, .properties, .resx, .strings, .stringsdict, .xcstrings, Qt .ts) that come back in their own format. Features such as live project settings, plugins and machine translation are not included.

Can I translate an InDesign or InCopy file?

Yes: an IDML file (.idml, from File › Export › InDesign Markup), an InCopy story (.icml) or a snippet (.idms). You get back the same file with only the translated text changed. Text in hidden conditions, on hidden layers and in hidden or non-printing frames is left out. For IDML, "May not fit" warns about overflow, but fonts aren't measured.

Read the docs: InDesign and InCopy files in TraduQ CAT

What can't TraduQ CAT do?

It has no machine translation, no shared server for teams and no live sync between computers, so two people can't work on the same project at once. For a Trados or memoQ package, the final document is usually built by whoever sent it, from the files you return, and a memoQ package goes back as MQXLIFF files, not as a .mqback. It can't align an existing translation into a translation memory yet. SDLXLIFF export and Wordfast TXML files are still in Beta, and on a phone the editor is read-only.

What happens with tags?

Tags appear as small chips that you can insert, move or copy with the keyboard. If a segment you edited, draft or confirmed, has missing, extra or unpaired tags, the final file cannot be downloaded until you fix it, so you do not hand back a file that breaks in Trados or memoQ. In Wordfast TXML files, a missing or repeated ut tag only warns, because Wordfast accepts it, but markup the source doesn't have still blocks. You can still save your progress at any time.

What does the downloaded file contain?

Your translations and their status (in SDLXLIFF and MQXLIFF files, also the segments you locked or unlocked), and nothing else. The editor writes into the original file instead of rebuilding it, so everything outside the targets, their statuses and, in some formats, the file's language marker (such as a YAML file's root locale key or a Qt file's language) stays byte for byte as it was, and a file you did not edit is downloaded exactly as it came. Packages and containers are rebuilt as zips with the files inside unchanged except your targets and statuses; minimal markup is added only where a target, or a plural form the target language needs, was missing. A PDF is the exception: you get a new Word document built from its text (see below).

Does it work on a phone or tablet?

The editor is designed for a computer with a keyboard. On a tablet it works with the side panel under the grid. On a phone it shows the progress, the QA list and a read-only Preview (Word, PowerPoint, Markdown, HTML, app strings, subtitles and plain text), with Previous and Next to move between segments.

Can I send back a return package (.sdlrpx)?

Yes, when you opened a Trados project package (.sdlppx). The export is an .sdlrpx file with the translated SDLXLIFF files, with no source files, reports or translation memories. It is fairly new, so check with the agency the first time. A memoQ package (.mqout) goes back as the translated MQXLIFF files, not as a .mqback delivery package.

Read the docs: Trados and memoQ packages in TraduQ CAT

Does the editor fill repetitions and check spelling?

Yes. Confirming a segment also writes its translation to its repetitions, including ones the file brought translated. It keeps the ones you confirmed differently, drafts you typed, review edits, ones a reviewer approved or commented on and locked ones. Spell check uses 42 built-in Hunspell dictionaries, in your browser: nothing is uploaded.

Read the docs: QA and spell check in TraduQ CAT

Can I translate a Word document?

Yes. Open a .docx file and it is split into segments that you translate in the same grid, with translation memory, termbase, QA and tags. The text of the body, tables, headers, footers, footnotes, endnotes and text boxes is translated; text inside images is not. The translated file is a .docx where only the translated text changes and the rest of the document stays as it was, with your target language set on the translated text. Old .doc files and encrypted files are not supported: save the document as .docx first.

What happens with the table of contents, fields and page numbers?

Fields such as page numbers, dates and cross-references are kept as tags and are not translated. A table of contents is rebuilt at export from your translated headings, and index entries are rows you translate like any other. When Word opens a file the export changed, it asks to update fields: choose Yes (and Update page numbers only if it asks about the table of contents) so the page numbers and the index match the translation.

What about tracked changes and comments in a Word file?

Paragraphs with tracked changes are shown read-only and are not written, so accept or reject the changes in Word first if you want them translated. Comments are not translated, but their marks stay where they were.

Does it set the language of the translated text for spell check?

Yes. The translated text in Word (.docx) and PowerPoint (.pptx) files is marked with the target language you chose when you opened the file, so Word and PowerPoint spell-check it in that language. Untranslated text keeps its own language. Excel files have no per-text language, so nothing is set there. Right-to-left languages such as Arabic and Hebrew, and Chinese, Japanese and Korean, can be used, but paragraph direction (right-to-left) and East Asian font hints (Chinese, Japanese, Korean) are not set: check the layout in Word, Excel or PowerPoint.

What is the bilingual review table?

It is a Word table (.docx) with one row per segment: number, source, target, status and notes. Send it to a reviewer, who can edit the target column, with or without tracked changes. Then use Import reviewed table… to bring the changes back: you see the list of differences, choose what to apply, and they go in as one undoable step. Changes that break the tags, or touch locked or read-only segments, are listed but not applied. It works for every file type the editor opens, not only Office files. Reviewing in TraduQ itself (Working as: Reviewer) keeps your edits as tracked changes instead, and Changes report (.docx) lists only the segments you changed.

Can I translate an Excel file?

Yes. Open an .xlsx file and the text cells of every sheet become segments that you translate in the same grid, with translation memory, termbase, QA and tags for bold or coloured words. Formulas, numbers, dates and true/false values are never read or changed, so the workbook keeps calculating as before. The same text in several cells is one segment, translated once for all of them. Hidden sheets, rows and columns are included and marked hidden in the grid. The header row of an Excel table (Format as Table) and the label of its totals row are shown locked: formulas refer to the table's columns by name, and Excel expects the totals label to match the table. The translated file is an .xlsx where only the translated text changes.

Are sheet names, comments and charts translated?

No, not for now. Sheet names stay as they are, because formulas and charts refer to sheets by name and renaming one would break them. Comments and notes are not translated, and neither is text in charts, shapes and text boxes. Old .xls files are not supported, and neither are password-protected workbooks: save an .xls as .xlsx, or remove the password in Excel (File › Info › Protect Workbook › Encrypt with Password), first.

My spreadsheet has one column per language. Can I translate one column into another?

Yes. When you open an Excel file, choose source and target columns instead of translating in place. For each sheet, pick the source column (for example B), the target column (for example C) and whether row 1 is a header; the languages are suggested when the header says something like English, es or ES-419. Each source cell with text becomes a segment, and its translation goes into the same row of the target column (the cell is created if there is none). A target cell that holds a formula or a number, or is inside merged cells, is shown locked and left as it is. Text already in the target column appears as a draft and is only rewritten if you edit or confirm it. Other columns and sheets are left untouched.

Can I translate a PowerPoint presentation?

Yes. Open a .pptx file and the text of every slide becomes segments that you translate in the same grid, with translation memory, termbase, QA and tags: slide titles, text boxes and other shapes, shapes inside groups, tables and the speaker notes, in slide order. Hidden slides are included and marked hidden in the grid. Slide numbers and dates are kept as tags. The translated file is a .pptx where only the translated text changes, with your target language set on it so PowerPoint spell-checks it in that language. Old .ppt files are not supported, and neither are password-protected presentations: save the file as .pptx, or remove the password, first.

What is not translated in a PowerPoint file?

Slide masters and layouts are left as they are, including the prompt text of their placeholders, such as Click to add title, which does not show in the slide show. Text in charts and SmartArt graphics is not translated, and neither is text inside images. Some shapes also have a backup copy for older PowerPoint versions; when it differs from the main text, that copy keeps its original text.

My translation is longer than the original. Will it fit in the text box?

Usually it does, but text boxes set to Shrink text on overflow need one click. PowerPoint keeps the font size it saved for the original text until the box is edited, so a longer translation can spill out of the box when you open the file. Click in the box, type a space and delete it, and PowerPoint shrinks the text to fit again.

Can I translate a PDF?

Yes, as text. Open a .pdf file and its text becomes segments that you translate in the same grid, with translation memory, termbase and QA. The layout is not kept: you download a Word document (.docx) with the text, headings and lists in reading order. Headers and footers repeated on every page are taken out of the text, translated once and written into the Word file's header and footer, with page numbers as fields. Up to 2,000 pages. Source as Word, in the export menu, gives you the PDF's text as a Word document without translating it.

Which PDFs can't be opened, and what is lost?

Scanned PDFs have no text to read: run OCR on them first (for example in ABBYY FineReader), save the result as a Word document (.docx) and open that here. Pages without text in an otherwise readable PDF are left out and listed, and so are pages whose text can't be read. Running heads that change from page to page, such as chapter titles, are left out too: they aren't in the grid or the Word file. PDFs that only restrict copying or editing open normally, but a PDF that needs a password to open is refused: save a copy without the password first. Images, fonts, colours, bold and italic are not carried into the Word file, and text inside images is not translated.

Does the editor suggest terms and numbers while I type?

Yes. In a target, press and release Ctrl (Control on a Mac too) and a list opens with suggestions for that segment: termbase terms, non-translatables, the source's numbers, dates and codes, TM fragments and words you've already used. After 3 letters it also opens on its own. It all runs in your browser and nothing is sent anywhere.

Read the docs: Termbases and glossaries in TraduQ CAT

Can I open several files or a whole folder at once?

Yes. Choose several files or a folder, or drag a folder onto the page, and they open as one project: one grid, one translation memory and one QA run, up to 300 files and 200 MB in all. A project has one language pair. Download one file or everything as one .zip, and use Resume, or pick the same files again, to go on later.

Read the docs: Getting started with TraduQ CAT

Can I translate a Word, Excel or PDF project in Trados or memoQ and bring it back?

Yes. From the Export menu of a Word, Excel, PowerPoint, PDF or text project (or several files opened together), download it as XLIFF 1.2 (for Trados, memoQ, Phrase and most CAT tools), XLIFF 2.0 or SDLXLIFF (beta, for Trados Studio). Translate it there, then choose Import translated XLIFF and pick the file you got back: you see each change and choose what to apply, then export the translated document from TraduQ. With Include the original file on (up to 20 MB), the XLIFF carries the original document, so dropping the XLIFF alone into TraduQ offers to open the document with its translations.

Can I get the translated Word document from a Trados or memoQ package?

Yes, when the package carries the Word original: a Trados package (.sdlppx) or SDLXLIFF that embeds its .docx, or a memoQ package (.mqout, .mqxlz) with the document inside. Export › Translated document (.docx) fills the original with your translations and, after the download, lists what stayed in the source language (untranslated, or paragraphs that didn't line up) and any formatting it couldn't place. TraduQ's segmentation can differ from Trados or memoQ, so a paragraph they split differently is filled as one segment. Open the document in Word and check it before delivery; your client may still expect the return package or the translated MQXLIFF files. The item doesn't show when the original isn't in the package (a Trados file that only points to it), or for Excel and PowerPoint originals.

Can I edit locked segments?

Yes. Segments the client locked in Trados (SDLXLIFF) or memoQ (MQXLIFF) are read-only at first. Press Ctrl+L (Cmd+L on a Mac) or click the lock to unlock one, and the same key locks it again. The exported SDLXLIFF or MQXLIFF file keeps the new lock state. In other formats a lock stays in TraduQ only.

Read the docs: Translating in the TraduQ CAT editor

Can I see the document as I translate?

Yes. Open the Preview tab in the side panel (Ctrl+Alt+V). Word, PowerPoint, Markdown and HTML show the document with your translation, software strings show as the app would, and subtitles play over a video you pick. On a phone it is read-only, with Previous and Next. It is built in your browser and nothing is uploaded, not even the video.

Read the docs: Preview your translation in TraduQ CAT

Keep exploring

Guides

TraduQ CAT docs · All guides · Glossary

Other free tools

All tools

Try it with your own file

Free, no sign-up, nothing to install.

With a free account, projects you make in TraduQ CAT show in your dashboard, and so do the TMs and glossaries it keeps in this browser. Your files still stay in this browser. Create a free account

Running a small agency? Your translators can use TraduQ CAT for free, and the dashboard keeps projects, vendors, purchase orders and invoices in one place. See what the dashboard does

Português (Brasil)